Skytrak 8042 Telehandler
Download Spec Sheet
The Skytrak 8042 telehandler is a great choice for job site versatility. With a rear counterweight that includes an integrated tow hitch and increased operator confidence due to its Stabil-Trak rear axle stabilization system when placing a load, this telehandler will give you assurance of safety while getting almost any job done!
Skytrak 8042 telehandlers come with:
- Full-flow replaceable spin-on engine oil filter
- Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector and replaceable dry filter element
- Oscillating rear axle with Stabil-Trak System
- Full-time planetary 4-wheel drive
- Emergency brake with transmission declutch feature
- Hydraulically actuated inboard wet disc brakes
- Certified ROPS/FOPS structure
- Air-filled tires 15.5 x 25, 12 ply
- Rear view mirrors
- Adjustable suspension seat with retractable seat belt
- 4-Wheel Power steering
- Lockable covers
- Instrument cluster with gauges and warning lights
- Operator selectable 4-wheel circle, 4-wheel crab, 2-wheel front drive option
- Proportional frame tilt, fork tilt and auxiliary hydraulics.
- Dual joystick controls
- Variable flow, load sensitive hydraulic system.
- Piston pump, 225 L system capacity
- Auxiliary hydraulics used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls and hydraulic lines.
- Load holding valves on frame level, stabilizer, attachment tilt, extend and lift cylinders.
The Skytrak 8042 has a width of 2.49 meters, a height of 2.52 meters, and a length (without forks) of 5.72 meters. Its operating weight, with carriage and forks, is 11,898 kg. Its drawbar pull is 10,866 kg.
It has a rated capacity of 3,629 kg and a maximum lift height of 12.7 meters.
The Skytrak 8042 has a forward travel speed of 32 km/h, and the time taken for the boom to extend and retract is 14.5 seconds and 14 seconds respectively. The lift speed, when the boom is retracted, is 15 seconds to go up and 12.5 seconds to go down. The frame levelling is 10°.
You can also have some extra accessories and options such as:
- Enclosed Cab
- Road Lights
- Work Lights
- Tires: Foam Filled, Rock, or Solid
- Rotating Beacon Fenders
The attachments available are:
- Side-Tilt Carriage 1.3 m or 1.5 m or 1.8 m
- Standard Carriage 1.3 m or 1.5 m or 1.8 m
- Sheet Material Adapter Tower 2.4 m; 1.3 m Standard
- Swing Carriage 1.8 m; 90 degrees
- Lumber Forks
- 44 mm x 178 mm x 1.5 m
- 60 mm x 152 mm x 1.5 m - Pallet Forks
- 60 mm x 102 mm x 1.2 m
- 60 mm x 127 mm x 1.2 m
- 51 mm x 152 mm x 1.8 m - Material Bucket
- 1.8 m, 0.76 m3
- 2.4 m, 1.15 m3
- 2.6 m, 1.53 m3 - Cubing Forks
- 51 mm x 51 mm x 1.2 m - Truss Boom
- 3.7 m, 907 kg capacity
- 4.6 m, 907 kg capacity
- 3.7 m with winch, 907 kg capacity - Grapple Bucket
- 2.4 m, 1.34 m3 - Fork Mounted Work Platform
- 2.4 m, 455 kg capacity - Lifting Hook
The engine in the Skytrak 8042 is a diesel Cummins QSB4.5T Turbo. Its electrical system runs on two batteries, each with 850 cold cranking amps at -18°C, that are 12-volt and 95-amp.
The Skytrak 8042 has an outside turning radius of 3.96 meters, and a ground clearance of 439 millimeters. Its wheelbase is 3.03 meters and its maximum reach from the front tires to its load center at 906 millimeters is 8.10 meters.
MAK Equipment is locally owned and operated and offers a large selection of dirt and aerial construction equipment available for rent or sale. We also repair and service all makes and models of equipment. If you’re interested in other scissor lifts or equipment, be sure to check out our Sales and Rentals page.