John Deere 210L Skip Loader
Download Spec Sheet
Mechanical-front-wheel drive (MFWD) and differential lock can be engaged on-the-go to give extra traction in poor underfoot conditions or for moving heavy loads. Optional limited-slip front axle delivers 65 percent of available power to the tire with the best traction for true all-wheel-drive pulling power.
Variable-speed electronically controlled fan automatically speeds up or slows down, operating only as needed to keep things cool. Helps conserve power and fuel, while reducing noise.
Optional new factory-installed Grade-Control-Ready package includes base components needed to control box-blade lift and tilt cylinders; machine is completed with dealer-supplied technology finishing kit of your choice. New entry-level grade-indication option provides the operator with roll and pitch of the machine with ±0.5-percent accuracy.
With optional ride control activated, the front loader hydraulic cylinders act as a shock absorber, smoothing travel over rough terrain, helping full loads reach their destination, and reducing operator fatigue.
Choose between cab or open operator station.
Higher canopy with wider and lower step provides better visibility over the hood and to the corners of the front bucket, as well as to the rear box blade. This also makes it easier to service under-canopy components.
The two-position tilt hood provides same-side ground-level access to engine and transmission dipsticks, engine-oil fill, fuel and air filters, and coolant reservoir. Fuel fill is also closely convenient.
Higher canopy with wide and low step provides excellent visibility over the hood and to the corners of the front bucket, as well as to the rear box blade. Makes it easier to service under-canopy components, too.
View John Deere L Series Tractor Loaders Brochure
Improved fender design and light positioning provide better visibility around the canopy compared to earlier models.
- Engine manufacturer: John Deere
- Engine model: PowerTech Plus 4045HT082
- Emission rating Tier: 4
- Displacement, ltr (Inches³): 5 (276)
- Rated speed, rpm: 2244
- Net output, kW (hp): 69 (93)
- Transmission type: Power Shift
- Number of speeds – forward: 4
- Number of speeds – reverse: 2
- Front axle type: Mechanical FWD
- Service type: Wet Multi Disc
- Service actuation: Hydraulic w/Power Assist
- Overall length, mm (ft/in): 5310 (17 ft 5 in)
- Minimum transport height, mm (ft/in): 2620 (8 ft 7 in)
- Overall width, mm (ft/in): 2130 (7 ft )
- Std shovel width, mm (inches): 2184 (86)
- Dump Clearance @ 45 deg, mm (ft/in): 2660 (8 ft 11 in)
- Dump Reach, mm (inches): 765 (30.1)
- Bucket Hinge Pin - Max Height, mm (ft/in): 3360 (11 ft )
- Coupler Pin-On
- Fuel tank capacity, ltr (gallons (US)): 3 (31)
- Hydraulic tank capacity, ltr (gallons (US)): 45 (11.9)
- Shovel cap SAE heaped, m³ (yd³): 86 (1.12)
- Alternator capacity, Amp: 130
- Forward Speed, kph (mph) : 34.5 (21.4)
- Reverse Speed, kph (mph): 11.7 (7.3)
- Lift Capacity to Full Height, kg (lbs): 2876 (6340)
- Oscillation angle, ± Degrees: 22
- Power Take Off: Optional
- PTO rated speed, rpm: 540
- Breakout force std shovel, kN (lbf): 3 (9521)
- System voltage, V: 12
- Pump type: Gear
- Pump flow, lt/min (gallons (US) / min): 96 (25.3)
- System pressure, bar (PSI): 63 (3200)
- Operating weight, kg (lbs): 5137 (11326)
MAK equipment can provide you with all you need to make the most of the machine. We can also rent or sell you any ancillary equipment that you might want, safety equipment, trailers, whatever you need to get the job done.
MAK Equipment is locally owned and operated and offers a large selection of dirt and aerial construction equipment available for rent or sale. We also repair and service all makes and models of equipment. Interested in other equipment? Be sure to check out our Sales and Rentals page.